1931 Ford Model A Ford for sale

Body is all steel, Floors and quarter wheel wells are new. Doors are uncut originals. Real 32 Truck Grille. Winshield shortened 5 inches. Paint is a nice Acrylic Urethane single stage. Body fit is nice, extra bracing was added in the trunk section for strength. Louvered decklid is really nice. Also comes with a half hood that matches and is louvered.

Frame is a stock Model A Boxed from the center crossmember forward,and lengthened 5″ in the rear to accommodate the 34 Ford rearend. It was blasted clean and has stock crossmembers front and rear. There is some pitting, but it is a solid frame. It was painted black with all suspension parts.

The front end is a super clean 32 heavy axle that was dropped years ago. 34 wishbones split with 32 B tierod ends. 40 Ford spindles, and 46 Ford front brakes. The rearend is a nice 34 Ford rear with a Model A spring. 4.11 gears, and 46 Ford brakes. Front shocks held up by some F-1 mounts. The torque tube and 34 driveshaft are cut down to fit. It is stock wheelbase. All brake parts and lines are new. It has 35 Ford 16″ wire wheels and new firestone bias-ply big and littles with tubes.

CLICK HERE, MORE PICTURES AND INFO PLUS THE LINK TO THE AUCTION →

1927 Ford roadster flathead hotrod for sale

Posted on November 17, 2011 by Legendary Lars

Killer little T love the awesome Windscreen and Flathead Engine. This is our 100th Car Featured on Legendary Finds

Check out this 1927 ford T for sale on Ebay

[nggallery id=100]

Seller States:

Ford Model T hotrod. This is my daily driver when the weather is good, I built it myself, but now have to make room for other projects. It has a 1950 Mercury 255 flathead engine with a 3 speed OD transmission, with two shifters. It has a ’55 Ford truck rearend and a Model A frontend with 41 Ford spindles and brakes. It runs and drives great. It could use some new tires, but I have been running around town on these for a few years. They are 16″ Ford steel wheels with old dirt track tires. The windshield is a 1930s Chris Craft boat posts, with lexan.

1930 ford model a hot rod chopped

Posted on October 17, 2011 by Legendary Lars

[nggallery id=37]
Nice little coupe, great Price !

Seller states:
1930 ford coupe model a 1936 flathead running 40 over rebuilt with a s-10 five speed trans new clutch with hydraulic throwout new driveshaft 1950 olds rearend with 411 gears has a 4inch chop doors open and close as they should new glass no side door windows or regulators its an open car 60s look tinted blue to match the blue metalflake seat inserts it has a new blue carpet with white edging custom louvered rear steel decklid.floors are all custom metal also a aftermarket new speedway 32 frame body is not channeled it looks better this way also a stock 4inch dropped and filled from socal speed 37 front axle 39 spindles with speedway dropped arm split wishbone front setup I am using the factory cowl gas tank. as for the body it is rust free under the urethane 2kprimer custom tailights vintage denman whitewalls with almost new tread the car also has a new wood roof and has been urethane sealed its a nice car solid as it gets and for the most part straight still needs to be finished very few things left before it can drive on the road I drove it around town windshield kicks out and I still use the factory cowl gas tank with the factory fuel guage its a hot rod not a street rod still needs front brakes and has a leaking water pump just a drip here and there also needs to have the lights and brakeswitch wired I may get to the wiring depending on how busy I am this week but its listed as not finished. it was taken to two shows this past weekend hunnert car pileup and a local show it will be at a cruise night wed night also im trying to get it out and situated.

Find this 1930 Ford Model A coupe for sale here